Overview
SMARC carrier is an extremely short size carrier board ideal for low power IoT applications as users can take advantage of the integrated capabilities found on the SMARC 2.1 modules.
SMARC supports an extended temperature range of -5°C to +60°C and offers a very small footprint; ideal for stationary applications.
Specifications
Form factor
|
- PC104 Carrier board dimension: 120 mm (L) x 100 mm (W)
|
|
Power Requirement
|
- DC24V in
- Support both AT and ATX power supply mode
|
|
Rear I/O
|
- 1 x DP1.2++ (resolution up to 4096 x2160 @60Hz)
- 1 x HDMI 1.4b (resolution up to 4096 x2160 @24Hz)
- Dual Channel 18/24bit LVDS (1920x1080 @60Hz)
- 1 x PWR Button + PWR LED, 1 x 1*4 LED : HDD LED, LTE LED ,Wifi LED , BAT LED.
- 1 x 8bit GPIO(4In/4Out) 1 x10 terminal block (1.00mm)
- 1 x 24V DC IN 1 x 3 terminal block (2.5mm)
|
|
Internal I/O
|
- 2 x UART (TX/RX), 2 x CAN FD , 3 x GbE LAN , 2 x SPI bus ,2 x I2C ,1 x SATA 3.0
|
|
Expansion Slot
|
- 1 x M.23042 & 3052 Key-B (Support PCIe x1, USB2.0, SATA 3.0) and Support LTE 5G module(PCIe))
- 1 x M.2 2280 Key-B (Support SATA 3.0, PCIe x1)
- 1 x M.2 2230 Key-E (Support PCIe, USB2.0 Interface, support WiFi/BT and NexCobot IO Card)
|
|
Power Requirement
|
- DC24V in
- Support both AT and ATX power supply mode
|
|
Environment
|
- Board level operating temperatures: -5°C to 60°C
- Storage temperatures: -40°C to 85°C
|
|
Relative humidity
|
- 10% to 90% (operating, non-condensing)
- 10% to 90% (non-operating, non-condensing)
|
|
| Certifications |
|
